Aerosol Srpay Paints
Quick-dry Acrylic-based spray paint. For all Interior and Exterior Applications. The product has good hiding power, coverage and gives protection against corrosion
Quick drying, smooth finish & high gloss.
Premium quality, high durable.
Interior and exterior application.
Ideal for wood, metals, plastic, automotive and motorcycle, equipments etc.
Available full colors including metallic, fluorescent colors.
Non fading, none yellowing & weather resistant
Typical Physical Properties
|Composition||Pure Acrylic Polymer + Acetone + Toluene + Esters + Butane + Propane. CFC FREE|
|Specific Gravity||0.93 ± 0.08|
|% NVM||Solid colors(20.00 ± 5.00) & metallic col.(40±5)|
|Viscosity On Zyhn Cup-1, at 28°C||33.00 ± 4 sec|
|Viscosity On Ford Cup-4 at 28 °C||15.00 ± 3 sec|
|Inside Pressure (m.pa) at 28 °C||0.40 ± 0.10|
|Flash Point||7.00 ± 3°C|
|Drying Time ( Surface Dry)||6-8 minutes|
|Drying Time (Hard Dry)||Minimum 1hr.|
|Film Hardness / Marking||Flexible & hard film.|
|Res. to washing & abrasion||Satisfactory|
|Res. To heat & humidity||Satisfactory up to 60°C with high humidity.|
|Hot water immersion test / Sealing test||Passed & satisfactory|
|Filling Ratio||Max- 75% of the total volume of can.|
Shake vigorously till glass agitator rattle in the can. Hold the container approximately 30 cm away from the object to be painted. Keep the can move from side to side so that the coating is deposited evenly. Better to apply several thin coating at an interval of min 10minutes. Better to store can at room temperature.
The surface to be painted must be free from grease, dirt, moisture and rust to attain excellent results.
Storage & Shelf Life
36 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight. do not expose to temperatures exceeding 500C because the cans contain pressurized gas. It may burn above 50°C. Do not pierce or burn even after use. Do not spray on naked flame or any incandescent materials. Keep out of reach of children.
Spray Paint is supplied as 12 cans / carton.
This information is provided in good faith based upon data and sources believed to be reliable and correct. Conditions of use, outside the control of the Company, dictate that no responsibility can be assumed for the ultimate performance of this product